Provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment.
NetGear ProSafe 8-Port 10/100 Switch with 4-Port PoE - FS108P
The ProSafe FS108P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS108P automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink™.
The affordably priced ProSafe FS108P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS108P is ideal for small business networks that need to inexpensively use PoE to deploy wireless access points and IP-based network
NetGear ProSafe 8-Port 10/100 Switch with 4-Port PoE - FS108P
- 8 auto speed-sensing 10/100 RJ-45 ports
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.3af DTE Power via MDI
- Forwarding modes: Store-and-forward
- Bandwidth: 1.6 Gbps
- Network latency: Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
- Buffer memory: 96 KB embedded memory per unit
- Address database size:1,000 media access control (MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean Time Between Failure (MTBF): 190,000 hours (~ 21 years)
- Acoustic Noise: 0 dB
- System: Power, PoE Maximum Power
- Per Port: Link, Activity, Speed, PoE Active, PoE Fault
- Total Power Consumption: 44 W maximum
- PoE Watt budget: 32W
- 802.3af Power Consumption: 32 W maximum (Ports 1 – 4)
- 48VDC, 0.8A power output; plug is localized to country of sale
- Dimensions (H x W x D): 1.1 x 9.3 x 4.1 in. (27 x 235 x 103 mm)
- Weight: 1.7 lbs. (0.74 kg)
- Operating temperature: 32 to 104°F (0 to 40° C)
- Storage temperature: 14 to 158°F (-10 to 70°C)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
- CE mark, commercial
- FCC Part 15 Class B
- VCCI Class B
- EN 55022 (CISPR 22), Class B
- C-Tick
- EN 55024
- CE mark, commercial
- CE/LVD EN60950
- NETGEAR Lifetime Warranty†
- 2 years for power supply
- ProSafe 8 Port 10/100 Switch with Power over Ethernet (FS108P)
- AC Adapter
- Wall-mount kit
- Installation guide
- Warranty/Support Information card
