SpectraLink IP-DECT Base Station, 1G9 version (PoE - power supply must be ordered separately)

• Networking - 10/100 Mbps Ethernet port, Manual or dynamic host configuration protocol (DHCP) network setup, Time and date synchronization from the Spectralink DECT Server, Event logging, LED status indication
• Channels - Zero blind slot channels (12 channels)
• RF Output - 20 to 24 dBm at antenna connection
• Sensitivity - typical -90 dBm measured at antenna connection at BER =0.001
• Range - Indoor: 65.6 - 164 ft. (20-50 m.) – Outdoor: 984.3 ft. (300 m.)
• Power Supply - Power over Ethernet (PoE) LAN cables or an external power supply can be used.

The Spectralink IP-DECT Base Station controls the traffic in the air and provides the link between Spectralink wireless handsets and Spectralink DECT Servers. The Spectralink IP-DECT Base Station interoperates with the entire Spectralink DECT Server portfolio.

Spectralink DECT Servers power the Spectralink IP-DECT Base Stations through standard Power over Ethernet (PoE) LAN cables or an external power supply can be used.

Each Spectralink IP-DECT Base Station has 12 speech channels and covers a circular area between 66 and 985 feet (20-300 meters) in diameter. Because coverage depends on location specifics such as building materials and interference, a site assessment before installation helps to determine the proper number and placement of base stations.

SpectraLink IP-DECT Base Station, 1G9 version (PoE - power supply must be ordered separately)

• Network and Provisioning
• 10/100 Mbps Ethernet port
• Manual or dynamic host configuration protocol (DHCP) network setup
• Time and date synchronization from the Spectralink
  
  
• DECT Server
• Event logging
• LED status indication
  
  
• Radio Interface
• RF Output 20 to 24 dBm at antenna connection
• Sensitivity: typical -90 dBm measured at antenna connection at BER =0.001
• Typical range:
• – Indoor: 65.6 - 164 ft. (20-50 m.)
• – Outdoor: 984.3 ft. (300 m.)
• Zero blind slot channels (12 channels)
  
  
• Electro Magnetic Compatibility Aprovals (REgulatory Standards)
• EN 301 489-1
• EN 301 489-6
• FCC RULES, FCC PART15, SubpartD; RSS-213
• IC Rules RSS213 Issue 2
  
  
• Safety (Regulatory Standards)
• UL60950-1 CAN/CSA-C22.2 No. 60950-1-03
• EN 60950-1
  
  
• DECT Aproval
• EN 301 406
  
  
• Electrical Requirements
• Power over Ethernet (IEEE 802.3af), Class 1 device
• Typical power consumption: 2W per unit
• External power supply option
• External antenna connection
  
  
• Environmental Conditions
• Operating temperature: 50º - 104º F (-10º - 40º C)
• Storage temperature: -58º - 158º F (-50º - 70º C)
• Relative humidity: Between 20% and 80% (non-condensing)
• The equipment is in compliance with the requirements of EU directive 2002/95/EC (ROHS) and 2002/96/EC (WEEE)
  
  
• Physical Characteristics
• Size: 3.9 x 1.2 x 3.9 in. (100 x 38 x 100 mm)
• Weight: 4.2 oz (120 gr.)
• Grey-white (NCS 0502-Y)
• Wall-mountable, indoor